搜索此博客

The job descriptions might depend on each factory's denifitions. But roughly, they are as below: What is IQC? IQC is short for: Incoming material Quality Control : The factories, manufacturers have special QC department, IQC to check the raw materials, components, and parts from their suppliers, before admitting to the warehouse. What is IPQC ? In Process Quality Control , they are monitoring assigned process, to make sure there won't massive defective parts or components going into the next process. PQC (Process Quality Control ) too. What is FQC? FQC is Final Product QC , they are supposed to check every piece of finished products before proceeding to packing. What is OQC? OQC is the acronym Outgoing Quality Control , they are responsible for checking the finished with packaging, using AQL sampling plan . QCs are supposed to pick out a defective products, parts, components or material, keep them in defective piles, and send back to rework. IPQC and ...

阅读全文

What is Final Random Inspection (FRI)?

八月 12, 2021

Final Random Inspection : is to check the product quality level according to AQL (Acceptable Qualtiy Limit), with an almost close standard definition: ANSI/ASQ Z1.4-2003 (Equivalent to ISO 2859-1 or MIL-STD-105E), when all the products are fully packed and ready for shipment. First we decide the sample plan: how many pieces to draw randomly from the whole lot. for general inspections: there are level I, II, III, small size, normal size, larger size. Then, from the random samples, the inspector will check for visual defects : critical, major, minor defects. The defect rates should be within their each limits. for example, the critcal defects is not allowed. Critical defects are those that is against the laws, standards, or harm the user. Major defects : are those defects that might rendor the product useless. like broken, crack, missing parts. Minor issues: the products are still usable, but it doesn't look good. exmples of final inspections: Exercise equipment final inspec...

阅读全文

Factory QC Check Services in China by ctstek.com

十二月 11, 2017

The third party inspection service : is to hire a 3rd party independent quality manage agent to check the quality of the products prior to shipment, to see if the quality level is up to the code. You can also hire an inspection company to do factory audit , factory evaluation , social audit , SA9000 audit , Sedex audit etc. Such audits are to check the factory's status, facilities, personal, agility etc, so before you enter into business with a supplier, you have a report on them first, without flying personally to the factory yourselves. It is a fun way to do business nowadays, even your quality management can be subcontracted.... Below are some of such services provided by WeCheck Inspection : Quality Inspection Pre-shipment Inspection Final Random Inspection (FRI) During Production Check (DUPRO) Container Loading Check (CLS) Production Monitoring Initial Production Check Factory Audit Factory Evaluation: Ethical Audit/Social Audit: SA8000 La...

阅读全文

由 Blogger 提供支持

主题背景图片创建者：Michael Elkan